Rotary kiln

Rotary kiln

Classification:Beneficiation Equipment

Shipping Port:Qingdao, Shanghai etc.

Product introduction:Rotary kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different mater..

 

Products with parameters

Product Overview:

Rotary kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials to be dealt with. The kiln is mainly composed by kiln cylinder, transmission device, supporting device, block wheel device, kiln head sealing devices, kiln tail sealing device etc.

Working Principle:

The material will be calcinated in the cylinder after enter the kiln from tail, and then will be turned over along the direction of circle and make a combined motion from the high-end to low-end along the axial because of the cylinder’s slope and low speed rotation. Then the material will be calcinated into the clinker after discomposition, calcination and cooling technical process. So they will discharge from the low-end and move into the cooler.

The fuel will be sprayed from the kiln head and start burning. The heat will be used to heat the materials and calcinated the material into the clinker. The hot-air formed during heat exchange  process will be blown into the kiln tail system from the feed end and released into the atmosphere.

Technical Parameter:
Model Technical Diameter Main Reduction Machine Main Motor Way of Catching Wheel Supporting Number Weight(t)
Rotary Speed(r/min) Slope(°) Capacity(t/h) Model Speed Ratio Model Power
(kw)
Rotary Speed(r/min)
Φ1.9/1.6×36 0.53-1.59 4 2.5-3 JZQ750-1 48.58 JZT-72-4 30 1200/400 Mechanical 3 53
Φ2.1/1.8×36 0.5-1.51 4 4 UT2-110 163.36 JZS-81 30/10 1410/470 Mechanical 3 75
Φ1.2×25 0.5-1.6 3 1.5 PM650 40.17 JZTY71-4 22 1200/120 Mechanical 3 34
Φ1.6×32 0.158-0.258 3 2 PM750 48.57 JZJY61-4 15 1200/120 Mechanical 3 46.82
Φ1.8×45 0.66-1.98 4 3.5 UT2-110 163.36 JZS-81 30/10 1410/470 Mechanical 3 80
Φ2.2×50 0.125-1.25 3.5 4 ZS145-11 157 YCT280-4A 30 1320/132 Mechanical 3 130.71
Φ2.5×50 0.516-1.549 3.5 5.5 ZS165-7 99.96 YCT355-4A 55 1320/440 Mechanical 3 167.5
Φ3×48 0.3309-3.309 3.5 35 ZL130-14 32.11 ZSN4-250-21B 90 1000/100 Mechanical 3 237
Φ3.2×50 0.398-3.975 3.5 50 ZL130-16 40.85 ZSN4-280-11B 190 1500/150 Mechanical 3 263
Φ3.3×52 0.391-3.91 3.5 50 ZSY500-28 27.707 ZSN4-315-082 190 1000/100 Mechanical 3 280.8
Φ4×60 0.396-3.96 3.5 104 ZSY630-35.5 34.601 ZSN4-355-092 315 1000/100 Mechanical 3 487.5
Φ4.2×60 0.4165-4.165 3.5 116 ZSY710-35.5 35.526 ZSN4-355-12 420 1000/100 Mechanical 3 576.1
Φ4.3×62 0.398-3.98 3.5 125 ZSY710-35.5 35.714 ZSN4-355-12 420 1000/100 Mechanical 3 598.5
Φ4.8×74 0.35-4 4 208 JH710C-SW305-40 42.226 ZSN4-400-092 630 1500/130 Mechanical  
Is the end of the article Next page:Three-cylinder Dryer